Installing a 35 mm Full Overlay Soft Close Cabinet Hinge

Installing a 35 mm Full Overlay Soft Close Cabinet Hinge

A 35 mm full overlay soft close cabinet hinge is a type of hinge that has a built in hydraulic damper to slow the door down and shut it softly. This helps prevent the slamming and banging that can happen when you open and close your kitchen cabinets. It is a popular upgrade for older cabinets or when you are remodeling your kitchen. This is a relatively simple project that most homeowners can do themselves with a few common tools.

In this article we will be showing you how to install a 35 mm full overlay soft close cabinet hinge on your existing kitchen cabinets. The process is very simple and involves removing the old hinges, marking where the new mounting plates will go on the cabinet frame, pre-drilling to prevent damaging the cabinet frame wood, and installing the new soft close hinges. The entire process should only take about 30 minutes to complete.

What are soft close hinges?

Soft close hinges are a special type of hinge that contains a damping mechanism to help reduce the noise associated with opening and closing cabinets. The damping mechanism is a small hydraulic fluid filled cylinder that is integrated into the hinge. When the door is closed, it will begin to descend quickly until it reaches a certain angle, at which point the damping system will activate and begin to slow the doors descent. This allows the door to come to a stop and close gently rather than slamming into the cabinet frame.

The cylinder in a soft close hinge is sealed and lubricated to ensure that it will not leak or cause damage. In addition, the damping cylinder is designed to have a very low compression force to prevent the doors from getting stuck in the closed position. The lubrication and compression force also help to extend the life of the damping cylinder.

When choosing a soft close cabinet hinge, you will need to consider the style of your cabinet doors as well as the weight of the doors. The style of your cabinet doors will determine how much of the door 'overlays' on the cabinet frame. The easiest way to determine this is to put a piece of masking tape vertically along the edge of the face frame and then lay a door over it. The size of the hinge will need to be large enough to fit into the hole in the door that is currently being used - this is usually 26mm, 35mm or 40mm for standard hinges.

Installing soft close cabinet hinges is a simple project that most homeowners can do themselves with just a few basic tools. By following these simple steps you will be able to reduce the noise and slamming associated with your kitchen cabinet doors and make your cabinets more comfortable to use.

Tags:35 mm hinges | chrome soft close cabinet hinge | fixed base soft closing hinge